Mastering AI Chip Complexity
Explore challenges and solutions in AI chip development
Download eBook
Si-Waveguide Absorption-Based Methane Sensor
Tool Used: OptSim Circuit
In this OptSim Circuit application note, we will demonstrate an Absorption-based methane sensor using Si waveguide. This methane sensor will:
- Probe the 1650.96-nm line in methane absorption spectrum (?_???= 0.4347 cm-1)
- Have the following waveguide parameters:
- length ? = 10 cm,
- intrinsic loss ?_?? = 2 dB/cm
- methane mode overlap Γ = 25.5%
- Demonstrate 8-dB input/output coupling
- Demonstrate a measured detection limit of 100 ppmv for 60-second averaging time
OptSim Circuit Cppmv Measurement
- Launched power is 10 dBm at 1650.9554 nm
- Total waveguide power transmission: ?????????Γ??????, where ?=?????/106
- Receiver noise, assumed to be independent of input signal level, calibrated for 100-ppmv detection limit with 60-second averaging time
- Receiver calibration based on calculated time-averaged noise-equivalent power (NEP) and absorbance (???):
OptSim Circuit Allan Deviation Analysis
Indicated blocks produce electrical signal whose average power is the Allan variance in ppmv?:
where ????,? is the ?th measurement sample (? total) with sampling time ????????
- Allan deviation (ppmv) versus averaging time matches results from Tombez et al. for 10-dBm launch power
- Detection limit improves (worsens) for higher (lower) launch power – consistent with assumption that sensor noise is independent of signal power
- Detection limit optimum at waveguide length = 1/??? [see H. Lin et al., “Mid-infrared integrated photonics on silicon: a perspective”, Nanophotonics 7(2), 393-420 (2018).]
- Sub-10-ppmv detection limit at optimum length for averaging times ? 91 seconds
- Detection limit improves as waveguide loss decreases
- Results assume sensor noise independent of signal power levels